How to Install Your Closet Drawers
Steven Tines12in. & 16in. Deep (6in, 8in, & 10in. heights)
Models: JLH-536, 536W, 536WC, 537, 537W, 537WC, 538, 538WC, 539, 539WC, 555CH, 556, 557CH, 558, 559CH, 560CH, 561, 562, 804W, 805, 805WC, 806, 806WC, 807, 807WC, 808, 809W, 850, 855
Need the full detailed installation instructions? Click the link below.
Download Full Installation PDF (Detailed)
Professional Insight: These drawers are designed to integrate seamlessly into our larger layouts. For more information on the assembly of your closet organizer or storage tower systems, click to view the expert installation guides below:
View Guide: Storage Tower Installation View Guide: Closet Organizer Installation
Before You Start
Ensure you have a flat, protected surface to assemble the unit to prevent scratching the solid wood finish. Verify all components and hardware against the list below.
Parts Checklist
- Drawer Face (1)
- Drawer Back (1)
- Drawer Sides (Left & Right)
- Drawer Bottom (1)
- Drawer Glides (2)
Hardware Highlights
- CAM Bolts & Nuts (8-10 depending on size)
- Drawer Screws (#6 1/2 in. and #6 1 in.)
- Drawer Handle & Machine Screws
- Rubber Bumpers (4 pack)
Required Tools
- Phillips Screwdriver
- Powered Drill with Phillips Bit
Step-by-Step Walkthrough Installation
Pro Tip: If installing multiple drawers of any heights (6", 8", 10"), always install from the bottom up to manage your vertical spacing effectively.
Step 1: Drawer Box Assembly
- Attach Hardware: Thread CAM bolts into the side panels and drawer face. Pro Tip: Use a manual screwdriver here. Power drills often over-torque and strip the wood fibers.
- Align Panels: Match the bottom-panel grooves across the back and sides.
- Lock Panels: Insert CAM nuts and rotate clockwise until you feel a firm "seat."
- Adding Drawer Bottom & Drawer Face: Slide the drawer bottom into place and secure the face panel with CAM nuts.
- Finishing: Attach the handle to the drawer face. Stick the rubber bumpers on the inside corners of the face to dampen sound.
Step 2: Attaching Drawer Glides to Drawer
- Glide Separation: Fully extend the glides and pull the release lever. The "thin" member goes on the drawer; the "thick" member goes in the tower.
- Glide Alignment: Position drawer at desired location to determine glide placement. Glide position is determined by which score mark aligns with tower groove.
- Glide Orientation: Place glide at the determined score mark. The open end should face the drawer back.
- Glide Mounting: Center the screw holes with the score mark. Secure the slide with 1/2 in. screws at the vertical oval locations.
Step 3: Mounting the Drawer to Tower
- Glide Position: Slow close mechanism should be positioned at the back wall and the front of the glide should be flush with the front of the tower rail.
- Installing Glide: Place the soft close glide into grooves at desired locations. Glide flanges should slot into the tower grooves. Secure the slide with 1 in. screws at back and front location.
- The Click: Align the drawer glides with the tower glides and push firmly until you hear the mechanical "click."
- Cycling: Open and close the drawer 3-4 times. This "primes" the soft-close piston and ensures the ball bearings are seated.
Step 4: Final Adjustments
Perfect gap alignment and handle installation.
- Leveling & Spacing: Loosen the front-face screws slightly to adjust the face position up or down Aim for even gaps between drawer faces.
- Permanent Lock: Once level, secure a 1/2 in. screw into the circular "locking hole" to prevent the face from ever shifting.
Need Assistance? Our team is here to help. Contact Customer Service at 1.800.480.6985 or email [email protected].
Selecting the Ideal Drawer Depth for Your Storage Needs
If you're reviewing these assembly steps before buying, you're already ahead of the curve. Selecting the right drawer height and depth is the most critical step in maximizing your closet’s efficiency. Our solid wood drawers aren't just about aesthetics; they are built for structural longevity that handles daily use without the sagging common in particle-board alternatives.
Which depth do you need? Find the perfect drawer solution for your storage needs. 6-inch deep drawers are ideal for intimates and accessories. 8-inch deep are perfect for standard clothing requirements. While our 10-inch deep handle bulky items with ease. These diffent detohs allow you to create a fully custom configuration that fits your life.
Browse Our Drawer Collection
