Solid Wood Closet Organizer with 2 Drawers and Doors Modern

• Available in Honey Maple, Red Mahogany, or Espresso finish
• 100% Solid Wood
• 12in. or 16in depth
• Cut-to-Fit
• Multiple configuration options up to 10ft. wide
• One configuration up to 12ft. wide
• Provides up to 22ft. of shelf space
• Provides up to 14ft. of hanging space
• Ventilated sides and shelving for air flow
• Includes 6ft. Accessory Tower
• Metal Garment Bars
• Two 6in. Drawers – Modern Style
• Full extension, slow-close drawer glides
• Glass or Solid Panel Doors
• Concealed slow-close pocket hinges
• Felt lined drawer bottoms
• Step-by-step instructions
• Add-on accessories available
• Configure to your needs
• For use in Closet, Pantry, Linen, Bathroom, Laundry

• This item ships in multiple packages
• Two 2ft. Adjustable Shelves
• Two 4ft. Shelves
• One 6ft. Shelf
• One 6ft. Accessory Tower
• Two 6in. Drawers – Modern Style
• Two Glass Doors
• Two 4ft. Metal Garment Bars
• One 6ft. Metal Garment Bar
• Six Metal Garment Bar Ends
• Six Metal J-Hooks
• Six Curved Wood Angle Brackets
• Six Metal Tower Brackets
• Seven Metal Shelf End Brackets
• Fourteen Metal Shelf Mounting L-Clip Brackets
• All Required Hardware & Fasteners
• Assembly Instructions
• One Year Manufacturer’s Limited Warranty

Organizer:
• Depth: 12in. or 16in.
• Height: 6ft. Tall. (Overall height on wall is determined by where the top shelf is positioned)
• Width: Up to 12ft wide.
• Tower Width 26.25in. Exterior. 24in. Interior
• Weight: 72lbs or 85lbs
• Supported weight: 25lbs per lineal ft.

Included Drawers:
• Drawer Face Height: 6in.
• Drawer Face Width: 26.25in.
• Drawer Box Depth: 11.25in. or 15.25
• Drawer Box Width: 21.75in.
• Drawer Box Height: 5in.
• Drawer Handle Hole Span: 5in.
• Total Drawer Weight: 18lbs or 22lbs.

Included Doors:
• Door Depth: .75in.
• Door Width: 12.75in. (Each)
• Door Height: 35in.
• Weight: 15lbs.(Glass) or 18lbs.(Solid)

Q.Is this real wood or a veneer?

A.This is 100% solid kiln-dried wood. We do not use MDF, particle board, or wood-grain Veneer.

Q.Is the finish safe for my family and clothes?

A.Absolutely. We use water-based, non-toxic stains with zero VOCs. There is no chemical smell or off-gassing after installation.

Q.Does the wood warp over time?

A.Our kiln-drying process removes internal moisture to stabilize the wood. Combined with our multi-layer finish, it creates a barrier that keeps the wood straight and true, even in humid environments.

Q.How much weight can this system really hold?

A.When you anchor it into your wall studs, the system is rated to support up to 1,200 lbs. This high capacity comes from combining the natural strength of solid wood with our heavy-duty steel hardware.

Q.Why is wall-mounting better than standing it on the floor?

A.Mounting into the studs gives you rock-solid stability that isn't affected by uneven floors. It also keeps the system away from floor moisture and lets you keep your baseboards as they are.

Q.Do I need to hire a pro to install this?

A.We designed this for the Discerning DIYer. If you’re comfortable with a drill, a level, and a saw, you can get a high-end result. The parts are modular, which takes the guesswork out of the assembly.

Q.What specific tools do I need for installation?

A.You will need a tape measure, level, screwdriver, and power drill. For precision cuts, we highly recommend a power miter saw with a fine-toothed blade to ensure the wood and metal garment bars have clean, burr-free edges.

Q.How does "cut-to-fit" help with my specific closet?

A.Most walls aren't perfectly straight. A cut-to-fit system lets you trim the shelving to your actual wall measurements on-site, giving you a custom, gap-free look that pre-boxed kits just can't match.

Q.What happens if my cut lands between two slats?

A.Our Shelf End Hardware has a wide plate designed to cover "short cuts." For the best look, just face the cut end toward the side wall where the hardware hides the raw edge perfectly.

Q.What are the exact dimensions of the tower?

A.The tower measures 72.7" high and 26.25" wide on the outside. The interior space is exactly 24 inches wide, which is our standard fit for all modular drawers and adjustable shelving.

Q.How high should I mount the top shelf?

A.A professional standard is 84 inches. This height allows for a "double-hang" setup—where you place a second bar at 48 inches—effectively doubling the amount of clothes you can hang in the same space.

Q.How far below the shelf does the garment bar sit?

A.The bar is exactly 2 inches below the shelf. We’ve found this is the perfect distance to let hangers slide on and off easily while keeping a clean, integrated look.

Q.Can I add items to my existing John Louis Home Closet Organizer?

A.Yes, additional shelves, drawers, and accessories are compatible and can be added to an existing organizer at any time.

View Installation Guide & Videos. Includes downloadable PDF manual.

View Installation Guide: 12in. & 16in. Deep Closet Organizer

View Installation Guide: 6in., 8in. & 10in. Drawer

View Installation Guide: Tower Door