• Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
  • Solid Wood Closet Organizer with 2 Drawers and Doors Shaker - John Louis Home - Closet Organizers
1 10

Solid Wood Closet Organizer with 2 Drawers and Doors Shaker

Solid Wood Closet Organizer with 2 Drawers and Doors Shaker

$1,226.25 USD
$1,226.25 USD
Sale Sold out
Shipping calculated at checkout.

The Standard for Small Space Efficiency

Since 2003, we’ve been perfecting the art of the solid wood closet, and we’ve found that the smallest spaces often require the smartest engineering. I designed this 2-drawer Shaker system with doors specifically to replace the "builder-grade" wire found in condos and guest suites. You deserve Affordable Elegance without the $1,200 custom franchise markup. By using kiln-dried Grade-A Pine, we provide a furniture-grade foundation that doesn't rely on flimsy metal cages or cheap boards that peel. Your goal is to buy a system once to save money and time, and this is the "clutter free" solution for high-traffic reach-ins.

Why this system is the superior choice:

Efficiency: Two 8-inch deep Shaker drawers and matching solid wood doors allow you to hide the daily essentials. It creates Refined Simplicity in spaces where every square inch counts.

1,200 lb. High-Load Performance: Don’t let the compact size fool you. This wall-mounted unit is engineered for the physical reality of a real wardrobe, providing rock-solid stability that wire racks simply cannot match.

Real Wood (No VOCs): 100% real wood finished with water-based stains. No toxic off-gassing or chemical smells—just the natural quality of wood that won't warp or swell.

All-Metal Hardware: We’ve eliminated the plastic failure points. Every rod and bracket is finished in Satin Nickel, and the drawers feature soft-close glides for silent, lifetime durability.

Where This System Shines (Ideal For):

Everyday Living & Condos: The 2-drawer footprint is the perfect fit for reach-in closets where you need to maximize vertical storage without overcrowding the floor.

Guest Suites & Nursery: A healthy, Inspired Design choice for spaces prioritizing air quality and a clean, furniture-grade aesthetic.

The Discerning DIYer: Achieve a professional built-in look in a single afternoon with a system that mounts securely to wall studs.

What's Included:

This kit features a 6ft. accessory tower, two 8-inch Shaker-style drawers with soft-close glides, and two matching Shaker doors. Provides up to 22ft. of shelf space and 14ft. of hanging space. Includes all Satin Nickel garment bars and hardware. Available in White or Chestnut.

The Installer’s Edge (The "Small Space" Hack):

When working in a tight reach-in closet, I always recommend installing your tower slightly off-center. By shifting the tower 12 inches to one side, you create a dedicated "long-hang" area for coats or dresses on the wider side, while the narrow side becomes a high-density "short-hang" zone for shirts. This simple adjustment ensures your new solid wood system feels like a custom-designed reach-in rather than a standard kit.

Installation: Your Rewarding Weekend Project

Achieve a custom-build result in a single afternoon and keep the $1,200 franchise markup in your pocket. This system is DIY-friendly and mounts securely to wall studs for a permanent finish that makes floor cleaning effortless.

Color: White
Size
Door Style

FEATURES

• Available in White or Chestnut finish
• 100% Solid Wood
• 12in. or 16in. depth
• Cut-to-Fit
• Multiple configuration options up to 10ft. wide
• One configuration up to 12ft. wide
• Provides up to 22ft. of shelf space
• Provides up to 14ft. of hanging space
• Ventilated sides and shelving for air flow
• Includes 6ft. Accessory Tower
• Metal Garment Bars
• Two 6in. Drawers – Shaker Style
• Full extension, slow-close drawer glides
• Two Glass or Solid Shaker Doors
• Concealed slow-close pocket hinges
• Felt lined drawer bottoms
• Step-by-step instructions
• Add-on accessories available
• Configure to your needs
• For use in Closet, Pantry, Linen, Bathroom, Laundry

WHAT'S INCLUDED

• This item ships in multiple packages
• Two 2ft. Adjustable Shelves
• Two 4ft. Shelves
• One 6ft. Shelf
• One 6ft. Accessory Tower
• Two 6in. Drawers – Shaker Style
• Two Glass Doors
• Two 4ft. Metal Garment Bars
• One 6ft. Metal Garment Bar
• Six Metal Garment Bar Ends
• Six Metal J-Hooks
• Six Curved Wood Angle Brackets
• Six Metal Tower Brackets
• Seven Metal Shelf End Brackets
• Fourteen Metal Shelf Mounting L-Clip Brackets
• All Required Hardware & Fasteners
• Assembly Instructions
• One Year Manufacturer’s Limited Warranty

DIMENSIONS

Organizer:
• Depth: 12in. or 16in.
• Height: 6ft. Tall. (Overall height on wall is determined by where the top shelf is positioned)
• Width: Up to 12ft wide.
• Tower Width 26.25in. Exterior. 24in. Interior
• Weight: 72lbs or 85lbs.
• Supported weight: 25lbs per lineal ft.

Included Drawers:
• Drawer Face Height: 6in.
• Drawer Face Width: 26.25in.
• Drawer Box Depth: 11.25in. or 15.25in.
• Drawer Box Width: 21.75in.
• Drawer Box Height: 5in.
• Drawer Handle Hole Span: 5in.
• Total Drawer Weight: 18lbs or 22lbs.

Included Doors:
• Door Depth: .75in.
• Door Width: 12.75in. (Each)
• Door Height: 35in.
• Weight: 15lbs.(Glass) or 18lbs.(Shaker)

FAQs

Q.Is this actually 100% real wood?

A.We use exclusively kiln-dried Grade A solid wood. Unlike MDF or particle board that rely on glues and sawdust, our solid wood build ensures a strong, permanent foundation—it won’t peel or off-gas, making it a high-quality fixture in your home for years.

Q.Can I fit this in a closet wider than 10 feet?

A.Our standard kits cover 10ft, but you can stretch them to 12 feet. At 12ft, you're using the wood at its full length, which leaves the tower with two 24-inch shelves. For anything wider, we suggest adding more shelving.

Q.Why is wall-mounting better than standing it on the floor?

A.Mounting into the studs gives you rock-solid stability that isn't affected by uneven floors. It also keeps the system away from floor moisture and lets you keep your baseboards as they are.

Q.How much weight can this system really hold?

A.When you anchor it into your wall studs, the system is rated to support up to 1,200 lbs. This high capacity comes from combining the natural strength of solid wood with our heavy-duty steel hardware.

Q.Why do the shelves have slats?

A.Closets don't get much airflow. Our slatted design acts as a natural ventilation system, letting air move through your fabrics. This helps prevent that "musty" closet smell common with solid-board systems.

Q.How high should I mount the top shelf?

A.A professional standard is 84 inches. This height allows for a "double-hang" setup—where you place a second bar at 48 inches—effectively doubling the amount of clothes you can hang in the same space.

Q.What specific tools do I need for installation?

A.You will need a tape measure, level, screwdriver, and power drill. For precision cuts, we highly recommend a power miter saw with a fine-toothed blade to ensure the wood and metal garment bars have clean, burr-free edges.

Q.How does "cut-to-fit" help with my specific closet?

A.Most walls aren't perfectly straight. A cut-to-fit system lets you trim the shelving to your actual wall measurements on-site, giving you a custom, gap-free look that pre-boxed kits just can't match.

Q.What happens if my cut lands between two slats?

A.Our Shelf End Hardware has a wide plate designed to cover "short cuts." For the best look, just face the cut end toward the side wall where the hardware hides the raw edge perfectly.

Q.What are the exact dimensions of the tower?

A.The tower measures 72.7" high and 26.25" wide on the outside. The interior space is exactly 24 inches wide, which is our standard fit for all modular drawers and adjustable shelving.

Q.How much room do my hangers need?

A.To ensure your clothes hang naturally without being squished, our metal bars are set 10.25 inches from the back wall. This specific gap is the industry standard to keep hangers from rubbing against the wall or bunching up your clothes.

Q.How far below the shelf does the garment bar sit?

A.The bar is exactly 2 inches below the shelf. We’ve found this is the perfect distance to let hangers slide on and off easily while keeping a clean, integrated look.

ASSEMBLY INSTRUCTIONS

View Installation Guide & Videos. Includes downloadable PDF manual.

View Installation Guide: 12in. & 16in. Deep Closet Organizer

View Installation Guide: 6in., 8in. & 10in. Drawer

View Installation Guide: Tower Door

View full details

100% REAL SOLID WOOD

No particle board, pressed wood or MDF. Just real solid wood. Available in multiple finish colors of Red Mahogany, Honey Maple, Chestnut, Espresso & White.

6FT. TALL STORAGE TOWER

Our ventilated tower allows for use of adjustable shelves, multiple sized drawers and doors in a central location.

SATIN NICKEL BARS AND HARDWARE

Our satin nickel garment bars allow your hanger to slide across the whole bar without hitting anything.

ADJUSTABLE SHELVES

Adjustable shelves provide you with the added functionality and flexibility you’re looking for. Simply insert the shelf pins and place them anywhere in the tower you desire. Use them as standard shelves or flip them upside down and at an angle to create the ultimate shoe organizer.

6, 8 & 10 INCH DEEP DRAWERS

Soft close drawers with smooth ball bearing glides featuring a felt lined drawer bottom keeps your items in cradled. Drawer faces are available in multiple styles with satin nickel handles to match your decor style.

SOLID OR FLUTED GLASS DOORS

Soft close doors with featuring quick release hinges and satin nickel handles hide items from being seen.

MULTIPLE CONFIGURATION OPTIONS

Everything you need is provided so you can use one of the multiple configuration options supplied or to create your own design.

MULTIPLE FINISHES & STYLES TO CHOOSE FROM

Choose from the most contemporary colors, drawer faces and door types that never go out of style so your closet space always looks designer made.

1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8

Anyone Can do It. Watch Installation Videos

  • 12in. & 16in. Closet Organizer 8ft. Configuration Assembly Video

  • Tower Drawer Assembly Video

  • Tower Door Assembly Video

People also purchased