Solid Wood Closet Organizer with 6 Drawers and Doors Modern

• Available in Honey Maple, Red Mahogany, or Espresso finish
• 100% Solid Wood
• 12in. or 16in. depth
• Cut-to-Fit
• Multiple configuration options up to 10ft. wide
• One configuration up to 12ft. wide
• Provides up to 22ft. of shelf space
• Provides up to 14ft. of hanging space
• Ventilated sides and shelving for air flow
• Includes 6ft. Accessory Tower
• Metal Garment Bars
• Six 6in. Drawers – Modern Style
• Full extension, slow-close drawer glides
• Two Glass or Solid Panel Doors
• Concealed slow-close pocket hinges
• Felt lined drawer bottoms
• Step-by-step instructions
• Add-on accessories available
• Configure to your needs
• For use in Closet, Pantry, Linen, Bathroom, Laundry

• This item ships in multiple packages
• Two 2ft. Adjustable Shelves
• Two 4ft. Shelves
• One 6ft. Shelf
• One 6ft. Accessory Tower
• Six 6in. Drawers – Modern Style
• Two Glass Doors
• Two 4ft. Metal Garment Bars
• One 6ft. Metal Garment Bar
• Six Metal Garment Bar Ends
• Six Metal J-Hooks
• Six Curved Wood Angle Brackets
• Six Metal Tower Brackets
• Seven Metal Shelf End Brackets
• Fourteen Metal Shelf Mounting L-Clip Brackets
• All Required Hardware & Fasteners
• Assembly Instructions
• One Year Manufacturer’s Limited Warranty"

Organizer:
• Depth: 12in. or 16in.
• Height: 6ft. Tall. (Overall height on wall is determined by where the top shelf is positioned)
• Width: Up to 12ft wide.
• Tower Width 26.25in. Exterior. 24in. Interior
• Weight: 72lbs or 85lbs.
• Supported weight: 25lbs per lineal ft.

Included Drawers:
• Drawer Face Height: 6in.
• Drawer Face Width: 26.25in.
• Drawer Box Depth: 11.25in. or 15.25
• Drawer Box Width: 21.75in.
• Drawer Box Height: 5in.
• Drawer Handle Hole Span: 5in.
• Total Drawer Weight: 54lbs or 66lbs.

Included Doors:
• Door Depth: .75in.
• Door Width: 12.75in. (Each)
• Door Height: 35in.
• Weight: 15lbs.(Glass) or 18lbs.(Solid)

Q.What specific tools do I need for a professional finish?

A.You will need a tape measure, level, screwdriver, and power drill. For precision cuts, we highly recommend a power miter saw with a fine-toothed blade to ensure the wood and metal garment bars have clean, burr-free edges.

Q.What if my closet is greater than 12ft. wide?

A.Our closet systems allow multiple configurations up to 10ft. wide. However, you may go up to 12ft., allowing only one configuration. When this is done you are using all the material at its maximum length, thus leaving the tower with two pre-cut 24in. shelves. (not including the tower bottom). When using a 10ft. or less configuration, you can place any leftover shelving within the tower, therefore filling it out more. With a 12ft. configuration there will likely be a need to purchase additional tower accessories or shelving.

Q.How much room do my hangers need?

A.To ensure your clothes hang naturally without being squished, our metal bars are set 10.25 inches from the back wall. This specific gap is the industry standard to keep hangers from rubbing against the wall or bunching up your clothes.

Q.What if my closet is less than 6ft. wide?

A.Since the organizers are cut-to-fit, most homeowners who have a closet of 6ft. or less can split the parts within the organizer and use them between multiple closets or walls. For example, a 6ft. Shelf and Garment Bar can be used on one wall, while the Tower and 4ft. Shelf/Bars are used on another wall or in another room.

Q.What are the exact dimensions of the tower?

A.The tower measures 72.7" high and 26.25" wide on the outside. The interior space is exactly 24 inches wide, which is our standard fit for all modular drawers and adjustable shelving.

Q.Is this real wood or a veneer?

A.This is 100% solid kiln-dried wood. We do not use MDF, particle board, or wood-grain Veneer.

Q.How does "cut-to-fit" help with my specific closet?

A.Most walls aren't perfectly straight. A cut-to-fit system lets you trim the shelving to your actual wall measurements on-site, giving you a custom, gap-free look.

Q.How high should I mount the top shelf?

A.A professional standard is 84 inches. This height allows for a "double-hang" setup—where you place a second bar at 48 inches—effectively doubling the amount of clothes you can hang in the same space. Long Hang professional standard is 72 inches

Q.Can I configure the layout differently from the picture?

A.Yes. We provide you multiple configuration options, but you can modify the layout to your specific needs. When designing your layout for a Reach-In Closet, make sure you adjust the tower position depending on your closet doors. In most cases the tower will need to be off center to allow free flowing of the drawers as well as the height to allow for the doors to open freely.

Q.What happens if my cut lands between two slats?

A.Our Shelf End Hardware has a wide plate designed to cover "short cuts." For the best look, just face the cut end toward the side wall where the hardware hides the raw edge perfectly.

Q.How far below the shelf does the garment bar sit?

A.The bar is exactly 2 inches below the shelf. We’ve found this is the perfect distance to let hangers slide on and off easily while keeping a clean, integrated look.

View Installation Guide & Videos. Includes downloadable PDF manual.

View Installation Guide: 12in. & 16in. Deep Closet Organizer

View Installation Guide: 6in., 8in. & 10in. Drawer

View Installation Guide: Tower Door